The reticle illumination turns off automatically after 30 minutes from the last pressing of the switch. Before turning off, the reticle blinks during several seconds. In order to turn the reticle illumination off manually, it is necessary to press and hold the switch during 2 seconds.
8. USING THE NC 3-12x50 RIFLESCOPE
Operating procedure:
1)Mount the unit on the corresponding landing place of the weapon and install the battery;
2)Open objective and eye protection caps;
3)Achieve maximum sharpness of the reticle image by rotating the eyepiece (3, Fig.1);
4)Check the riflescope for correct parallax adjustment. To do so, chose a target for aiming and swing your eye from side to side relatively to the eyepiece. If the reticle displaces from the aiming point, rotate the knob (7, Fig.1) and repeat the action. The riflescope is free from parallax, if the center of the reticle is not displaced relatively to the target with eye swinging;
5)Rotate magnification adjustment ring (8, Fig.1) to achieve the required magnification;
22
