5. INSTALLATION ON THE WEAPON
Installation of the NC
The Ø30mm fixation rings must be firmly attached to the riflescope body with a
WARNING:
Do not over tighten fixation rings. Over tightening can lead to deformation of the riflescope, and this will prevent parallax adjustment mechanism to work correctly.
If screws of the front fixation rings are tightened with excessive force, the parallax adjustment knob will rotate with effort. In this case it is necessary to loosen screws of the fixation ring to restore the normal way of parallax knob rotation.
It is recommended to allow negative inclination of the riflescope towards the rifle barrel in the range of
20
