You can raise the unit for unobstructed view without taking the helmet off. To do so press (and hold) the button (2, Fig.6) and rotate the unit until you hear a click.

All other operations with the unit mounted on a helmet are identical to those with the headgear.

5.15Mounting on a rifle

The unit can be mounted on a rifle with Picatinny mount adapter (MIL-STD-1913). The optical axle of the goggles coincides with the rifle’s Picatinny rail.

FIGURE 7. NVS Unit with Picatinny adapter.

Two types of weapon mount adapters are available – Fig.7 and Fig. 8. Either adapter enables mounting the unit to the Picatinny rail. The type shown on Fig. 7 has two screws with large grooved heads for convenient tightening.

Note: Over tightening the screws may damage the thread.

The ‘Quick Release’ model (Fig. 8) utilizes a latch with a spring and patented accu-torque screw. You can attach and detach your goggles within a few seconds. The accu-torque screw fixes the mount with predefined torque thus protecting the thread from accidental damage caused by over tightening.

16

Page 19
Image 19
Newcon Optik NVS 15 operation manual Mounting on a rifle, NVS Unit with Picatinny adapter