Newcon Optik NVS 15 operation manual Locking screw

		1	2	3	4
FIGURE 6. Helmet mount
1.	Locking screw	3.	Flip-flop adjusting screws
2.	Flip/flop button	4.	Mount binding screw

The unit is fixed to the mount by the locking screw (1, Fig. 6). To adjust the position of the unit to your eye level use the screw (4, Fig. 6). To adjust the eye relief first loosen the locking screw (1, Fig.6) and set a comfortable distance between the eyes and the eyepiece; then tighten the locking screw back.

You can fixate the unit in three predetermined positions: vertical, horizontal, and 15-20 degrees above horizontal. Although the relative angles between these positions cannot be changed, the starting point can be adjusted by screws (3, Fig.6). If you loosen them, you can rotate the flip-flop mechanism to find the suitable starting point. Tighten the screws (3, Fig.6) after the adjustment.

15