|
| Troubleshooting |
|
|
Problem | Possible Cause | Possible Solution |
| |
• Slow running, noisy or hot blades. | • Dry, corroded blades. | • Lubricate blades. |
| |
|
| • Blades or blade support bent. | • Straighten blade or blade support. |
|
|
| • Bent or damaged teeth. | • Straighten teeth. |
|
|
| • Loose blade bolts. | • Tighten blade bolts. |
|
• Unit will not start. | • Battery not installed properly. | • Check battery installation. |
| |
|
| • Battery not charged. | • Check battery charging requirements. |
|
|
| • Lock off not fully operated. | • Check that lock off is fully pulled back |
|
|
|
| prior to moving main trigger. |
|
• Battery won’t charge. | • Battery not inserted into charger. | • Insert battery into charger until green LED appears. |
| |
|
| • Charger not plugged in. | Charge up to 8 hours if battery totally drained. |
|
|
| • Plug charger into a working outlet. Refer to |
| |
|
|
| “Important Charging Notes” for more details. |
|
|
|
| • Check current at receptacle by plugging in a |
|
|
|
| lamp or other appliance. |
|
|
|
| • Check to see if receptacle is connected to a |
|
|
|
| light switch which turns power off when you turn |
|
|
| • Surrounding air temperature too hot | out the lights. |
|
|
| • Move charger and tool to a surrounding air |
| |
|
| or too cold. | temperature of above 40 degree F (4.5°C) or |
|
|
|
| below 105 degree F (+40.5°C). |
|
For assistance, visit our website www.blackanddecker.com for the location of the service center nearest you or call the Black+Decker help line at
10
