Newcon Optik NVS 15 Auto shut OFF at bright light, Using the unit with headgear or helmet

5.7Auto shut OFF at bright light

The NVS 15 goggles has a built-in high light sensor located near the IR illuminator (2, Fig. 1). This sensor shuts the goggles off after about 45 second exposure to light exceeding 10-1lux.

To reset the goggles switch it off and then back on as described in 6.3 and 6.2.

High-light shut-off feature does not mean that the unit will react to occasional flashes or bright spots. It protects the tube against excessive light exposure only.

5.8Using the unit with headgear or helmet

The unit is supplied with headgear. Prior to using the headgear adjust its straps so that the headgear fits the head comfortably but firmly and does not slide off when you are moving.

The unit is attached to the headgear using standard headgear/helmet mount already

attached to the NVS bridge (5, Fig. 1).
To attach headgear to loosen the
	1
tightening screw (2, Fig. 3) on
headgear, slide the standard mount on
the bridge onto the rail on the
headgear/helmet mount, and then		FIGURE 3
tighten the screw.

2

To set comfortable eye-relief (the distance between your eye and the eyepiece), loosen tightening screw (8, Fig. 3) on the headgear and move the unit, then tighten the locking screw.

11