Rear Burner Conversion |
|
Tools required: |
|
Phillips Head Screwdriver (+) | Monkey Wrench |
6mm Nut Driver | 6mm Wrench |
|
1.Remove the cover of the rear burner by removing the screws in the firebox. Use another hand to hold the orifice cover to ensure it doesn't fall.
Install burner orifice
2.Use monkey wrench to loosen the orifice nut and take out the orifice holder. Use a 6mm nut driver or Allen key to unscrew and remove the orifice.
3.Replace the orifice for LP gas with the orifice for NG. After the orifice is replaced, put the cover of the rear burner back to its original location.
18
