ITEM# MD1008

OPERATION OF LCD

Note:

Before using, please be sure Audio and Video RCA’s are connected, yellow plug connects with the video signal 1, and green plug connects with video signal 2, white plug link with left audio channel, red plug link with right audio channel.

1.Press “Open” to release the LCD; adjust the viewing angle by pushing it back.

2.Press the Power button to turn the LCD on or off, when the LCD is off the bottom is blue, if on the buttons will illuminate.

3. Press “menu” at the bottom and work with these buttons to adjust the screen brightness, saturation , contrast, tint , sharpness, OSD H-Position, original factory settings, OSD level position, OSD vertical position, OSD waiting time, self-searching channel (TV mode) and exit menu.

4.V1/V2 bottom can exchange the Video 1 and Video 2.

5.Infrared wireless headphones

The receiving area of the headphones is 8m and 45 degree angle.

Before using the head phone, please be sure they are powered on. Make sure the volume is not loud or it will cause damage to hearing.

6.The reading lamp switch is located at the bottom and can be powered on or off from there.

9

Page 10
Image 10
Nextar MD1008 instruction manual Operation of LCD