PARTS AND CONTROLS

ENG 17

FITTING HEADREST MOUNT

The headrest mount is designed to fit the wide variety of shapes and sizes of headrests in modern cars. The foam pad allows you to set the angle of the screen and will eliminate vibration when the car is moving.

1. Place the two mounting straps over your headrest with the mount's sponge facing headrest, and release button on top.

2.Adjust to your desired viewing angle, then firmly secure the mount by tightening the straps.

See diagrams below.

FITTING PORTABLE DVD PLAYER TO HEADREST MOUNT

Gently slide the Portable DVD player down by aligning the backpanel groove with the headrest mount, until you hear the click sound.

See diagram below.

NOTE:

The headrest is a primary safety device in a car. Always adjust the headrest for optimum safety of the seat occupant. Fit & adjust the headrest mount thereafter.

MOBILE ENTERTAINMENT

Page 18
Image 18
NextBase SDV685-AC operating instructions Fitting Headrest Mount, Fitting Portable DVD Player to Headrest Mount