DRaising the Flash

When using the flash, be sure it is fully raised as shown at right. Do not touch the flash during shooting.

ALowering the Built-in Flash

To save power when the flash is not in use, press it gently downward until the latch clicks into place. Do not use force. Failure to observe this precaution could result in product malfunction.

t AThe Flash-Ready Indicator

The flash-ready indicator (N) lights to show that the flash is fully charged when the shutter-release button is pressed halfway.

APreventing the Built-in Flash from Firing

Lowering the flash prevents it firing in modes P, S, A, and M. The flash can also be turned off by selecting a flash mode of s(off).

78