Nikon COOLPIXS5200PLUMKIT Hide info is selected for Photo info in Monitor, Support Print date

Problem	Cause/Solution	A
	• If camera clock has not been set, “Date not set”
	indicator flashes during shooting and movie
	recording. Images and movies saved before clock is
	set are dated “00/00/0000 00:00” or “01/01/2013
Date and time of recording	00:00” respectively. Set the correct time and date	20, 104,
	from the Time zone and date option in the setup
are not correct.		E83
	menu.
	• The camera clock is not as accurate as ordinary
	watches or clocks. Periodically compare the time of
	the camera clock with that of a more accurate
	timepiece and reset as required.
No indicators displayed in	Hide info is selected for Photo info in Monitor	104, E86
monitor.	settings in the setup menu.
Print date not available.	Time zone and date has not been set in the setup	20, 104,
	menu.	E83
Date not imprinted on	• The current shooting mode is one that does not
images even when Print	support Print date.	104, E89
date is enabled.	• The date cannot be imprinted on movies.
Screen for setting time zone
and date is displayed when	Clock battery is exhausted; all settings were restored	20, 22
camera is turned on.	to their default values.		Technical
Camera settings reset.
	Battery temperature is high. Turn off camera and
Monitor turns off, and the	allow battery to cool down before resuming use. After		Notes
power-on lamp flashes	the lamp flashes for three minutes, the camera will	25
quickly.	turn off automatically. Pressing the power switch also
	turns off the camera.		and
			Index
	The camera may become hot when used for an
Camera becomes hot.	extended period of time to shoot movies or send	–
	images using an Eye-Fi card, or when used in a hot
	environment; this is not a malfunction.

F9