Error Messages

Refer to the table below if an error message is displayed.

Display

Cause/Solution

A

 

Battery temperature is

 

 

 

elevated.

The camera turns off automatically. Wait until the camera

 

 

The camera will turn off.

–

or battery temperature has cooled before resuming use.

The camera will turn off

 

 

 

 

 

to prevent overheating.

 

 

 

Memory card is write

The write-protect switch is in the “lock” position. Slide the

–

protected.

write-protect switch to the “write” position.

 

 

This card cannot be used.

An error occurred while accessing the memory card.

 

 

 

• Use an approved card.

14, F22

 

This card cannot be read.

• Check that the terminals are clean.

 

 

 

• Confirm that the memory card is correctly inserted.

 

 

 

 

 

 

 

The memory card has not been formatted for use in the

 

 

 

camera.

 

 

Card is not formatted.

Formatting deletes all data saved on the memory card. If

 

 

you need to keep copies of any images, make sure to

F5

Format card?

select No and save the copies to a computer or other

 

 

 

 

 

 

medium before formatting the memory card. Select Yes

 

SectionReference

 

and press the kbutton to format the memory card.

 

 

 

 

 

 

 

 

E89