Nikon date, date, Print, settings, Print date, Time zone and date, Hide info is selected for Photo info in Monitor

Problem	Cause/Solution	A
	• If the camera clock has not been set, the “Date not
	set” indicator flashes during shooting and movie
	recording. Images and movies saved before the
	clock is set are dated “00/00/0000 00:00” and “01/
Date and time of recording	01/2014 00:00” respectively. Set the correct time	16, 77,
	and date for Time zone and date in the setup
are not correct.		E74
	menu.
	• The camera clock is not as accurate as ordinary
	watches or clocks. Periodically compare the time of
	the camera clock with that of a more accurate
	timepiece, and reset as required.
No indicators displayed in	Hide info is selected for Photo info in Monitor	77, E76
monitor.	settings in the setup menu.
Print date not available.	Time zone and date has not been set in the setup	16, 77,
	menu.	E74
Date not imprinted on	• The current shooting mode does not support Print
images even when Print	date.	77, E78
date is enabled.	• The date cannot be imprinted on movies.
Screen for setting time zone
and date is displayed when	The clock battery is exhausted; all settings were	16, 18
the camera is turned on.	restored to their default values.
			Technical
The camera settings reset.	extended period of time to shoot movies or send
	The camera may become hot when used for an
The camera becomes hot.	images using an Eye-Fi card, or when used in a hot	–	Notes
	environment; this is not a malfunction.
	When Autofocus mode is set to Full-time AF or		and
The camera makes sound.	while in some shooting modes, the camera may	56, 74	Index
	produce an audible focusing sound.

F9