Pixel Mapping

Check and optimize the camera image sensor and image proces- sors if you notice unexpected bright spots in your pictures (note that the camera comes with the sensor and processors already optimized). Before performing pixel mapping as described below, check that the battery is fully charged.

1 Attach a lens and lens cap.

Turn the camera off and attach a 1 NIKKOR lens. Do not remove the lens cap.

2 Select Pixel mapping.

Turn the camera on, press G, and select Pixel mapping in the setup menu.

3 Select Yes.

Pixel mapping begins immediately. Note that other opera- tions can not be performed while pixel mapping is in progress. Do not turn the camera off or remove or disconnect the power source until pixel mapping is complete.

4 Turn the camera off.

Turn the camera off when pixel mapping is complete.

Firmware Version

View the current firmware version.

g

162

Page 182
Image 182
Nikon S1 White, 27631, 27619, S1 Red, 27629 manual Pixel Mapping, Firmware Version