Nikon S1 Red, 27631, 27619, S1 White Turn the camera on, ATurning the Camera Off, AAuto Power Off

5 Turn the camera on.

Press the power switch to turn the camera on. The power lamp will briefly light green and the monitor will turn on. Be sure to remove the lens cap before shooting.

ATurning the Camera Off

To turn the camera off, press the power switch again. The monitor will turn off.

AAuto Power Off

If no operations are performed for about a minute, the display will turn off and the power lamp start to flash (if desired, the delay before the display turns off automatically can be changed using the Auto power off option in the setup menu; 0 158). The camera can be reactivated by operating the shutter-release button. If no opera- tions are performed for about three minutes after the display has turned off, the camera will turn off automatically.

AAttaching and Removing Lenses

Turn the camera off before attaching or removing lenses. Note that when the camera is turned off, the sensor protection barrier in the lens will close, protecting the camera image sensor.

ALenses with Retractable Lens Barrel Buttons

If you are using a lens with a retractable lens barrel button (0 18), the camera will turn on automatically when the retractable lens bar- rel lock is released; in addition, if the view through the lens is dis- played or the monitor is off, the camera will turn off when the lens barrel is locked (in the case of 1 NIKKOR VR 10–30mm f/3.5–5.6 and 1 NIKKOR VR 30–110mm f/3.8–5.6 lenses, firmware version 1.10 or later is required if locking the lens barrel is to turn the camera off when the monitor is off; for information on updating lens firmware, visit the Nikon website for your area).

s

19