Viewing Pictures on TV

The MV-12 COOL-STATION and EG-E5000 audio/video (A/V) cable included with the camera can be used to connect the camera to a television or video- cassette recorder (VCR).

Choosing a Video Mode

The Interface > Video mode item in the setup menu offers a choice of NTSC and PAL ( 80). Be sure that the mode selected matches the standard used in the video device.

1 Place the camera in the COOL-STATION

Turn the camera off and place it in the COOL-STATION ( 8).

2 Connect the A/V cable

Insert the black plug into the COOL-STATION’s A/V out connector.

Insert the yellow plug into the video-in jack on the television or VCR. Connect the white plug to the audio-in jack.

3 Tune the television to the video channel

If in doubt, consult the documentation for your television or VCR.

4 Turn the camera on

Press the button for about a second to turn the camera on. The camera monitor will remain off and the television will show the image normally shown in the monitor.

Viewing Pictures on TV

To reduce the drain on the battery when viewing pictures for an extended period, use the supplied EH-63 AC adapter.

PAL

If PAL is selected for Video mode and the camera connected to a video device, video output will be suspended and the camera monitor will turn on when the camera is in movie mode.

More on Playback

45

Page 55
Image 55
Nikon 27706, 27698, 27697, 27699, 27696 manual Viewing Pictures on TV