Nikon 7900 Ensure the cover is closed firmly, Replacing Batteries, CP1, Alternative Power Sources

3 Close the Battery-chamber Cover Close the cover () and slide it in until it latches ().

Ensure the cover is closed firmly.

First Steps

Replacing Batteries

Turn the camera off and make sure that the Power-on Lamp has gone out before opening the Battery-chamber Cover. Slide the Battery Latch in the direction indicated to eject the battery, which can then be removed using your fingers.

•Note that the battery may become hot during use. Observe due cau- tion when removing the battery.

CP1

Your camera also uses a non-rechargeable CP1 lithium batteries (×1).

Make sure the orientation and the positive/negative ter- minals are correct, and then insert the battery in the same way as EN-EL5.

Alternative Power Sources

Terminals

To power the camera continuously for extended periods, use an optional EH-62A AC adapter. Do not, under any circumstances, use another make or model of AC adapter kit. Failure to observe this precaution could result in overheating or in damage to the camera.

For more information on attaching instructions for EH-62A AC adapter kit, see “Con- necting the EH-62A AC Adapter Kit” ( 137).

11