FOCUS/ZOOM B C
With its single control
ring,
this lens lets you focus and zoom in and out rapidly in
one
smooth operation.
To focus, while looking through the camera's viewfinder, turn the focus/zoom
ring ©until the image on the focusing screen appears crisp and clear.
To
zoom In or
out,
look through the viewfinder and slide the focus/zoom ring up
or down until the desired composition is framed on the focusing screen. The
major focal lengths of 35mm, 50mm, 70mm and 135mm are indicated on the
lens barrel for quick reference.
MACRO FOCUSING D
At 135mm, the lens can be focused beyond the minimum focusing distance of
1.5m (5 ft): just set the focus/zoom ring to the orange line/"W" setting. The ef-
fective minimum focal distance and maximum reproduction ratio then become
0.4m
(1.3
ft) and
1:3.8,
respectively. Remember, however, that on the macro
mode you cannot zoom the lens.
Notes:
1) Although your lens has macro focusing capability, you are still advised to use a
Micro-Nikkor lens for document copying or slide duplication where sharpness
is a critical requirement.
2) When using this lens in macro range, the focus/zoom ring tightens slightly.
RECOMMENDED FOCUSING SCREENS
Various interchangeable focusing screens are available for Nikon F3- and F2-
sertes cameras to suit any type of lens or picture-taking situation. Those which
are recommended for use with this Zoom-Nikkor 35-135mm f/3.5-4.5 lens are
listed below. For screens used for Nikon cameras other than F3- and F2-series
cameras
(e.g.,
Nikon FA, FE2, FM2 and FE), refer to the column for F3-series
cameras. For the K2, B2 and
E2
focusing screens, refer to the columns on the K,
B and E screens, respectively. For details, also refer to your focusing screen's
instruction sheet.
A/L G4 K.'P
F3
F2
•
When
the Teleconverter
TC-201,
the following table:
—-~___^
Screen
Camera
———____
F3
F2
A/L
» •'
B
CJ
0
c D E
ti
g
TC-20C
Gl G2
or
G3
TC-14Ais
G4 HI H2
attached to this lens,

m

H4 J
• •
K P
• •
M R
• • T •
jse
U
•