5Check the results.
If the camera was able to measure a value for white balance, the message shown at right will be displayed.
If lighting is too dark or too bright, the camera may be unable to measure white balance and the message shown at right will be displayed. Return to Step 4 and measure white balance again.
r
AOther Methods for Measuring Preset White Balance
To enter preset measurement mode (see above) after selecting preset white balance in the information display, press Jfor a few seconds. If white balance has been assigned to the S(g) button, white balance preset measurement mode can be activated by keeping the S(g) button pressed for a few seconds after selecting preset white balance with the S(g) button and command dial.
96