Accessories

Slip-on leatherette front lens cap

Other 39mm screw-in filters

Rear lens cap LF-1

TeleconverterTC-14A*

39mm screw-in filter L37C

TeleconverterTC-14B

Holder for gelatine filters

Teleconverter TC-201 *

Strap

TeleconverterTC-30!

Lens hood HK-19

Autofocus Converter TC-16A*

Heavy duty case CT-304

 

* Slight vignetting may occur.

 

SPECIFICATIONS

Focal length: 300mm

Maximum aperture: f/2.8

Lens construction: 11 elements in 9 groups (plus dustproof glass plate built into front)

Picture angle: 8° 10'

Distance scale: Graduated in meters and feet from 2.5m (10 ft.) to infinity (°°)

Aperture scale: f/2.8—f/22 on both standard and aperture-direct-readout scales

Minimum aperture lock: Provided

Diaphragm: Fully automatic

Exposure measurement: Via full-aperture method with AI cameras or cameras with CPU interface system; via stop-down method for other cameras

Focusing: Nikon Internal Focusing (IF) system

Tripod mounting: Built-in tripod mounting collar rotatable through 360°

Lens hood: Provided

Filters: Slip-in glass filter holder accepts 39mm screw-in filters; gelatine filter holder accepts gelatine filters

Mount: Nikon bayonet mount

Dimensions: Approx. 124mm (4.9 in.) dia. x 241mm (9.5 in.) extension from flange; approx. 250mm (9.8 in.) long (overall)

Weight: Approx. 2,950g (104 oz.)

LENS CARE

Although you should always keep the lens surfaces clean, rough cleaning must be avoided. Wipe with a soft, clean cotton cloth moistened with alcohol to remove grease or fingerprints from the lens surfaces.

If you use ether in cleaning the lens, a smudge sometimes appears on the surface of a multi-coated lens. If this happens, wipe it again with a cotton cloth moistened with alcohol.

Take care in cleaning the rear part of the lens with a spraygun-type blower because its strong stream of air may damage the lens diaphragm blades. To avoid damage, set the lens at full aperture and use the blower far enough away.

Always protect the lens surface from dirt or damage. The lens hood also helps to protect the lens.

Keep the lens cap in place whenever the lens is not in use.

If you do not intend to use the lens for a long time, protect it from rust and mold by storing it in a cool, dry place. Also, do not store in direct sunlight, and keep it away from naphthalene or camphor.

Be careful not to get the lens wet or drop it in water. Water on the lens may cause malfunction.

16

Page 18
Image 18
Nikon AF-I instruction manual Accessories, Specifications, Lens Care