Steps First

First Steps

Inserting the Battery

The camera uses a rechargeable EN-EL8 Li-ion battery (supplied).1 Turn the camera offIf the power-on lamp is lit, press the power switch to turn the camera off.2Opencover the battery-chamber/memory card slot

3 Insert the battery The orange battery latch is pushed aside as the battery is inserted. The battery is fully inserted when the latch clicks back into place.

Inserting the Battery

Inserting the battery upside down or backwards could damage the camera. Check to be sure the battery is in the correct orientation.

4Closecover the battery-chamber/memory card slot ￿

￿

BatteriesRead and follow the warnings and cautions on pages ii–iii and 92 of this manual.
Removing the Battery

Turn the camera off before removing or inserting batteries. To eject the battery, open the battery-chamber/memory card slot cover and slide the battery latch in the direction shown. The battery can then be removed by hand. Note that the battery may become hot during use; observe due caution when removing the battery.

￿

￿

10