During transfer, the dialog shown at right is displayed. Signal strength is indicated by the antenna icon at the top of the dialog, varying from “strong” (four bars) to “no signal” (antenna icon turns red). For maximum signal strength, ensure a clear line of sight between the camera antenna and the wireless LAN adapter or access point. To cancel transfer, press the button.

Transferring images to computer

0 0 0 2 / 0 0 0 6

Cancel

If PictureProject is not installed on the destination computer, pictures transferred in modes other than PC Mode will be saved to the “PictureProject” folder in “My Pictures” (Windows) or “Pictures” (Macintosh). In PC Mode, the destination folder can be selected in Windows Explorer (Windows) or the Finder (Macintosh) and pictures transferred via drag and drop. If PictureProject is installed, pictures transferred in modes other than PC Mode will automatically be displayed in PictureProject after transfer, and the destination directory can be changed in the PictureProject “Transfer Options” dialog.

When transfer is complete, the message shown at right will be displayed. Press the button to transfer additional pictures. To exit wireless transfer mode, turn the

camera off or press the button and select another mode.

TRANSFER COMPLETED

Shooting Date

Printing and Transfer Wireless

The Wireless Status LED ( 2)The camera wireless status LED shows data transfer status as follows:LED blinks: Camera searching for connection or in power-saving modeLED on: Connection established or data transfer in progressLED off: Not connected The () Button

The () button can not be used to transfer pictures when the camera is in wireless mode.

Memory Cards

Pictures can not be transferred when a locked (write-protected) memory card is inserted in the camera. Unlock the card before insertion.

72