Nikon COOLPIX S6 Next, Help, ad-hoc, ration):, rst-time, Create an, proceed to Step, : Connect to an, Create Profile manually, on. Click Next to proceed

Printing and Transfer Wireless

4Confi rm that the computer is equipped for wire- less LAN and click Next. For more information, click Help.

Connect the COOL-STATION to the computer us-
5 ing the supplied USB cable and turn the camera
on. Click Next to proceed.
• Windows: If the computer is not confi gured for
wireless LAN, uses fi xed IP addressing, or is run-	Varies with
ning Windows XP Service Pack 1, the dialog	setup type
shown in Step 7 will be displayed. Otherwise
proceed to Step 6.
• Macintosh: Proceed to Step 7.

6If the computer uses more than one wireless LAN adapter or access point, choose the adapter or ac- cess point the camera will use from the pull-down menu, then choose the network type (the options available vary with the existing network confi gu-

ration):

• Create an Infrastructure (Access Point) network profile: Connect to an existing infrastructure network.

•Create an Ad-hoc (Camera to Computer) network profile (not available if the com- puter is already part of a wireless network or uses a fixed IP beginning with an address other than 169.254): Create a wireless network consisting only of the camera and the computer. Recommended for fi rst-time users of wire- less networks.

•Create Infrastructure (Access Point) and Ad-hoc (Camera to Computer) network profiles: Connect to an ad-hoc network in one location and infrastructure networks in others.

•Create Profile manually: Adjust settings manually.Click Next to proceed to Step 7.

66