E76

The Setup Menu
Reference Section

Auto Off

If no operations are performed for a specified amount of time, the monitor turns
off and the camera enters standby mode (A23).
This setting determines the amount of time that passes before the camera enters
standby mode. You can select 30 s, 1 min (default setting), 5 min, or 30 min.
CWhen the Monitor Has Turned Off to Save Power
When the camera is in standby mode, the power-on lamp flashes.
If no operations are performed for approximately another three minutes, the camera will turn off
automatically.
When the power-on lamp is flashing, pressing any of the following buttons will turn the monitor
back on:
Power switch, shutter-release button, A button, c button, or b (e movie-record) button
CNotes About Auto Off
The time that passes before the camera enters standby mode is fixed in the following situations :
- When a menu is displayed: 3 minutes
- During slide show playback: Up to 30 minutes
- When the AC adapter EH-62F is connecte d: 30 minutes
The camera does not enter standby mode when transferring images using an Eye-Fi card.
Press the d button M z tab M Auto off