Pelican PSE1800/PSE2000 Premium Whole House Water Filter | |
& Salt Free Water Softener/Conditioner Combo | Page 13 |
|
|
|
|
Complete the Installation
1.Check for leaks.
2.Peel off the protective plastic wrap from the stainless steel tank jackets.
3.Add the Pelican logo sticker in the desired location on the tank.
4.Wax stainless steel tank jacket(s) with wax provided or any other
CAUTION:
Avoid high flow rates such as bathtub, utility sinks, hose bibs,
Carbon dust may be released into the water lines of the house/building during the first few days of water use after carbon tank installation. The carbon dust is harmless, but may give the water a gray appearance that should diminish within a week or 10 days depending on water use.
Clean your Hot Water Heater (optional)
Cleaning and restoring the plumbing system is a major benefit of the NS3/NS6 NaturSoft system. In order to minimize the time required to complete the
Turn off the heat source, attach a hose to the drain valve at the bottom of the tank and flush the heater by opening the drain valve. After the water heater is completely filled with water, turn the heat source back on.
Alternatively, open several fixtures in the home and let water run simultaneously for a couple of minutes. Focus on the hot water side and high flows like the bathtubs. This method is not quite as effective.
© 2013 Enviro Water Solutions, Inc. | www.pelicanwater.com |
3060 Performance Circle, Suite 2, DeLand, FL 32724 | (877) |
