Pelican PSE1800, PSE2000 Installation Overview, Pre-Installation, Bypass Valve Installation

Pelican PSE1800/PSE2000 Premium Whole House Water Filter	PSE1800-2000 Rev M
& Salt Free Water Softener/Conditioner Combo	Page 6

Installation Overview

Wall		Wall
	Pre-Filter
IN	OUT
Incoming		Outgoing
		Water
Water
		To House
Supply
		19"
	Whole House Water Filter	Salt Free Water
		Softener/Conditioner

Figure 1

Pre-Installation

Bypass Valve Installation

Red Arrow

Quick Connect Nut

Water Filter Head

Whole House

Water Filter

INLET UPFLOW

DOWNFLOW INLET

Figure 2

The Bypass Valve comes pre-assembled and ready to install with the O-Rings, Split Rings, and Quick Connect Nuts. Push the Bypass Valve into the head of both the Pelican Whole House Water Filter and Salt Free Water Softener/Conditioner with the unthreaded ends oriented toward the tanks and hand-tighten the Quick Connect Nuts.

Notice:

The bypass valve(s) included with this system are designed for multiple Pelican water systems. This may result in the arrows on the bypass valve(s) pointing differently than shown. If the arrows on your bypass valve(s) do not match the diagram, remove the red arrows by pulling them straight up, turn them 180° to match the drawing, and push them back down onto the stem.

© 2013 Enviro Water Solutions, Inc.	www.pelicanwater.com
3060 Performance Circle, Suite 2, DeLand, FL 32724	(877) 842-1635