Troubleshooting
If the camera fails to function as expected, check the list of common problems below before consulting your retailer or
|
| Problem | Cause/Solution | A |
|
|
| Wait for recording to end. |
|
|
|
| If the problem persists, turn the camera off. |
|
|
|
| If the camera does not turn off, remove and reinsert |
|
|
| The camera is on but does | the battery or batteries or, if you are using an AC | |
|
| adapter, disconnect and reconnect the AC adapter. | ||
|
| not respond. | E83 | |
|
| Note that although any data currently being recorded | ||
|
|
| will be lost, data that have already been recorded will |
|
|
|
| not be affected by removing or disconnecting the |
|
|
|
| power source. |
|
|
|
|
|
|
|
|
| • The camera automatically turns off to save power | |
|
|
| (auto off function). |
|
Technical |
| Camera turns off without | • The camera or batteries have become too cold and | |
| cannot operate properly. |
| ||
|
|
| ||
|
| warning. |
| |
|
| • The inside of the camera has become hot. Leave | – | |
|
|
| ||
Notes |
|
| the camera off until the inside of the camera has |
|
|
| cooled, and then try turning it on again. |
| |
|
|
|
| |
|
|
|
|
|
and |
|
| • The camera is off. | |
|
| • The batteries are exhausted. | ||
Index |
|
| • The camera has entered standby mode to save | |
|
| power. Press the power switch, |
| |
|
|
|
| |
|
|
| button, Abutton, cbutton, or b(emovie- |
|
|
| Monitor is blank. | record) button. |
|
|
|
| • The flash lamp flashes while the flash is charging. | |
|
|
| Wait for the flash to charge. |
|
|
|
|
| |
|
|
| • The camera and computer are connected via a USB cable. | |
|
|
| • The camera and TV are connected via an audio/ | 71, E22 |
|
|
| video cable or HDMI cable. |
|
|
|
|
|
|
F8