B Lowering the Flash
Push the flash down gently to lower the flash until it clicks into place when not in use (A3).
C The Flash Lamp
The status of the flash can be confirmed by pressing the shutter- release button halfway.
• On: The flash fires when you press the
• Flashing: The flash is charging. The camera cannot shoot images.
•Off: The flash does not fire when an image is taken.
If the battery level is low, the monitor turns off while the flash is charging.
C The Flash Mode Setting
•The setting may not be available with some shooting modes.
•The setting applied in A(auto) mode is saved in the camera’s memory even after the camera is turned off.
C
If the camera detects red eye while saving an image, the affected area is processed to reduce red- eye before the image is saved.
Note the following when shooting:
•More time than usual is required to save images.
•
•In some cases,
Features Shooting
43