4.Review the Exhausting section before installing the exhaust system. Install the ductwork from your dryer to the exhaust hood. The crimped end of the duct sections must point away from your dryer.

DO NOT use sheet metal screws when assembling ducting. These joints should be taped. Never use plastic flexible exhaust material.

Tip for tight installations: install a section of exhaust system to your dryer before putting it in place. Use duct tape to secure this section to your dryer, but do not cover ventilation slots at the back of the unit in dryer cabinet.

5.Review Electrical Requirements section.

BEFORE OPERATING OR TESTING, follow the grounding instructions in the Grounding section.

U.S. MODELS:

IMPORTANT – All U.S. models are produced for a 3-WIRE SYSTEM CONNECTION.

The Dryer frame is grounded to the neutral conductor at the terminal block.

A 4-WIRE SYSTEM CONNECTION is required for new or remodeled construction, mobile homes, or if local codes do not permit grounding through neutral conductor. If the 4-wire system is used, the Dryer frame cannot be grounded to the neutral conductor at the terminal block. Refer to the following instructions for 3- and 4-WIRE SYSTEM CONNECTIONS.

Remove the terminal block cover plate.

Insert the power cord with a UL-listed strain relief through the hole provided in the cabinet near the terminal block.

A strain relief must be used.

Do not loosen the nuts already installed on the terminal block. Be sure they are tight. Use a 3/8” (1cm) deep well socket.

6.Review Gas Requirements section. Remove the pipe thread protective cap.

Apply pipe joint compound or about 1 1/2 wraps of Teflon tape over all threaded connections.

Pipe joint compound must be resistant to the action of any liquefied petroleum gas.

Connect the gas supply to your Dryer.

An additional fitting is required to connect the 3/4” (1.9 cm) female thread end of a flexible connector to the 3/8” (1 cm) male threaded end on the dryer.

Securely tighten the gas line fitting over threads.

Turn on the gas supply. Check all gas connections for leaks using a soap solution. If bubbles appear, tighten the connections and recheck.

DO NOT use an open flame to check for gas leaks.

01 installing your dryer

installing your dryer _15

DV219AGW-02691A_EN.indd 15

2009-01-30 ¿ÀÈÄ 6:19:25

Page 14 Page 16
Page 15
Image 15
Samsung DV219AE*, DV219AGW, DV219AG* user manual Models
Page 14 Page 16

DV219AE*, DV219AG*, DV219AGW specifications

The Samsung DV219AGW, DV219AG*, and DV219AE* series of dryers are designed to combine efficiency, elegance, and advanced drying technologies to enhance the laundry experience. These models are characterized by their sleek designs, intuitive controls, and a variety of features that cater to the needs of modern households.

One of the standout features of the Samsung DV219AGW and its counterparts is the innovative Moisture Sensor Technology. This system detects the moisture level in the clothes and automatically adjusts drying time, ensuring garments are neither over-dried nor under-dried. This not only protects fabrics but also saves energy, making these dryers an eco-friendly option for consumers.

The Samsung DV219 series is equipped with several drying cycles to accommodate different fabric types. Options like Normal, Heavy Duty, Delicate, and Timed Dry allow users to customize the drying process based on their specific needs. Additionally, the Wrinkle Prevent feature helps reduce wrinkles by intermittently tumbling clothes after the cycle ends, giving users peace of mind when pulling items out of the dryer.

Energy efficiency is another critical aspect of these dryers, with many models boasting Energy Star certification. This means they meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency, ultimately resulting in reduced utility bills and a smaller carbon footprint.

Another notable characteristic is the Smart Dry System, which intelligently controls drying settings based on load sizes and types. This smart technology optimizes performance while also being user-friendly, ensuring a smooth experience for individuals of all technical skills.

The design of the Samsung DV219 series models emphasizes practicality with features such as a large-capacity drum, providing ample space for larger laundry loads. Additionally, the models often include easy-to-use digital displays, allowing users to monitor settings and remaining dry time effortlessly. The dryers also feature a filter cleaning indicator, reminding users to clean the lint filter for optimal performance.

In summary, the Samsung DV219AGW, DV219AG*, and DV219AE* dryers are exemplary in their combination of innovative technologies, energy efficiency, and user-friendly features. They not only prioritize garment care but also align with environmentally conscious values, making them an excellent choice for modern laundry needs.
Top Page Image Contents