If the new Dryer is installed into an existing exhaust system you must make sure:

•The exhaust system meets all local, state, and national codes.

•That a flexible plastic duct is not used.

•To Inspect and clean all lint buildup from inside the existing duct.

•The duct is not kinked or crushed.

•The exhaust hood damper opens and closes freely.

The static pressure in any exhaust system must not exceed 0.83 inches of water column, or be less than 0.

This can be measured while the Dryer is running with a manometer at the point where the exhaust duct connects to the Dryer. A no-heat setting should be used. The Dryer tumbler should be empty and the lint filter clean.

IMPORTANT TO INSTALLER

Please read the following instructions carefully before installing the dryer. These instructions should be kept for future reference.

REMOVE THE DOOR FROM ALL DISCARDED APPLIANCES TO AVOID THE DANGER OF A CHILD WARNING SUFFOCATING.

LOCATION CONSIDERATIONS

The dryer should be located where there is enough space at the front for loading the Dryer, and enough space behind for the exhaust system. This Dryer is factory-ready for rear exhaust. To exhaust out the bottom or the left, use the accessory exhaust kit. Instructions are included with the kit. It’s important to make sure the room has enough fresh air. The Dryer must be located where there is no air-flow obstruction.

On gas Dryers, adequate clearance as noted on the data plate must be maintained to ensure adequate air for combustion and proper Dryer operation.

THE DRYER MUST NOT BE INSTALLED OR STORED IN AN AREA WHERE IT WILL BE EXPOSED TO WATER AND/OR WEATHER. THE DRYER AREA IS TO BE KEPT CLEAR OF COMBUSTIBLE MATERIALS, GASOLINE, AND OTHER FLAMMABLE VAPORS AND LIQUIDS. A DRYER PRODUCES COMBUSTIBLE LINT. THE AREA AROUND THE DRYER SHOULD BE KEPT LINT-FREE.

ALCOVE OR CLOSET INSTALLATION

The Dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or

WARNING closet.

•No other fuel-burning appliance should be installed in the same closet as the Dryer.

•WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED TO THE OUTDOORS. See EXHAUST INFORMATION section.

•Minimum clearances between the Dryer and adjacent walls or other surfaces are: 2” in front, 17” on top, 1” on either side, and 2.375” in the back.

•The closet front must have two unobstructed air openings for a combined minimum total area of 72 in² with 3” minimum clearance on the top and bottom. A louvered door with equivalent space clearance is acceptable.

01 installing your dryer

installing your dryer _9

DV219AGW-02691A_EN.indd 9

2009-01-30 ¿ÀÈÄ 6:19:22

Page 8 Page 10
Page 9
Image 9
Samsung DV219AE*, DV219AGW, DV219AG* Important to Installer, Location Considerations, Alcove or Closet Installation
Page 8 Page 10

DV219AE*, DV219AG*, DV219AGW specifications

The Samsung DV219AGW, DV219AG*, and DV219AE* series of dryers are designed to combine efficiency, elegance, and advanced drying technologies to enhance the laundry experience. These models are characterized by their sleek designs, intuitive controls, and a variety of features that cater to the needs of modern households.

One of the standout features of the Samsung DV219AGW and its counterparts is the innovative Moisture Sensor Technology. This system detects the moisture level in the clothes and automatically adjusts drying time, ensuring garments are neither over-dried nor under-dried. This not only protects fabrics but also saves energy, making these dryers an eco-friendly option for consumers.

The Samsung DV219 series is equipped with several drying cycles to accommodate different fabric types. Options like Normal, Heavy Duty, Delicate, and Timed Dry allow users to customize the drying process based on their specific needs. Additionally, the Wrinkle Prevent feature helps reduce wrinkles by intermittently tumbling clothes after the cycle ends, giving users peace of mind when pulling items out of the dryer.

Energy efficiency is another critical aspect of these dryers, with many models boasting Energy Star certification. This means they meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency, ultimately resulting in reduced utility bills and a smaller carbon footprint.

Another notable characteristic is the Smart Dry System, which intelligently controls drying settings based on load sizes and types. This smart technology optimizes performance while also being user-friendly, ensuring a smooth experience for individuals of all technical skills.

The design of the Samsung DV219 series models emphasizes practicality with features such as a large-capacity drum, providing ample space for larger laundry loads. Additionally, the models often include easy-to-use digital displays, allowing users to monitor settings and remaining dry time effortlessly. The dryers also feature a filter cleaning indicator, reminding users to clean the lint filter for optimal performance.

In summary, the Samsung DV219AGW, DV219AG*, and DV219AE* dryers are exemplary in their combination of innovative technologies, energy efficiency, and user-friendly features. They not only prioritize garment care but also align with environmentally conscious values, making them an excellent choice for modern laundry needs.
Top Page Image Contents