Samsung DV219AE* operating Instructions, tips, Dry Level, Selection Button, Temp Selection

		To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,
		press the Dry Level button. An indicator light will illuminate next to the desired
	Dry Level	dryness level. Press the button repeatedly to scroll through the settings.
3		Larger or bulkier loads may require the More Dry setting for complete
	Selection Button
		dryness. The Less Dry setting is best suited for lightweight fabrics or for
		leaving some moisture in the clothing at the end of the cycle. Use for items
		that lay flat or hang to dry.
		To select the correct temperature for the load, press the Temp button. An
		indicator light will illuminate next to the desired temperature. Press the button
		repeatedly to scroll through the settings.
4	Temp Selection	High – For sturdy cottons or those labeled Tumble Dry.
	Button	Medium – For permanent press, synthetics, lightweight cottons, or items
		labeled Tumble Dry Medium.
		Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
		Extra Low – Provides the lowest heated dry temperature possible.
		When using Manual Dry cycles, time can be adjusted by pressing the Time
5	Time Selection	Selection button.
	Button	During the Sensory Dry cycle, the time light indicator is off because exact
		drying times are determined by fluctuating humidity levels.
		When the cycle is complete, a chime will sound.
	Signal Selection	When the Wrinkle Prevent option is selected, the chime will sound
6		intermittently.
	Button
		Adjust the volume of the chime or turn it off by pressing the Signal button.
		Press the button repeatedly to scroll through the choices.
		Wrinkle Prevent provides approximately 90 minutes of intermittent tumbling
		in unheated air at the end of the cycle to reduce wrinkling. Press the Wrinkle
7	Wrinkle Prevent	Prevent button to activate this feature.
	Selection Button	The indicator light above the pad will illuminate when Wrinkle Prevent is
		selected. The load is dry, and can be removed at any time during the Wrinkle
		Prevent cycle.
		Time can be added or subtracted from the automatically set times in the
8 Adjust Time		Manual Dry cycles (Time Dry, Wrinkle Release, or Air Fluff cycles).
		To add or subtract time from the cycle, press the Adjust Time arrow pad up
		or down until the desired time is displayed.
9	Start/Pause	Press to pause and restart programs.
	selection button

Press once to turn your dryer on, press again to turn it off. If your dryer is left

10Power button on for more than 10 minutes without any buttons being touched, the power automatically turns off.

02 operating Instructions, tips

operating Instructions, tips _21

DV219AGW-02691A_EN.indd 21

2009-01-30 ¿ÀÈÄ 6:19:30