Nikon COOLPIXS10 manual AF Assist, Sound Settings, Adjust the following sound settings, Auto Off

AF Assist

If [Auto] is selected, AF-assist illumination will be used to assist the focus operation when the subject is poorly lit (AF-assist illumination is unavailable in some modes; 23). Choose [Off ] to disable AF-assist illumination (note that the camera may be unable to focus if lighting is poor).

Sound Settings

Adjust the following sound settings:

Option			Description
Button	When [On] is selected, beep will sound once when operations are completed suc-
sound	cessfully, three times when error is detected.
Shutter	Choose volume of sound played when shutter is released (note that shutter sound
sound	may not always play;	80). Choose [Off ] to disable shutter sound.
Start-up	Choose volume of sound played when camera is turned on. If [Off ] is selected, no
sound	sound will be played when camera is turned on. Startup sound will not play when
	USB cable is connected (		47, 51).

The Setup Menu

Record Orientation

Photographs taken while [Auto] (the default setting) is selected contain informa- tion on camera orientation, allowing them to be rotated automatically during play- back or when viewed in PictureProject.

Camera orientation is not recorded when [Off ] is selected.

Auto Off

Choose the time before the monitor turns off automatically to save power from 30 seconds, 1 minute (the default setting), 5 minutes, or 30 minutes. Regardless of the option chosen, the monitor will remain on for 3 minutes when menus are dis- played, and for 30 minutes when [Loop] is selected during Pictmotion or slide show playback or the camera is powered by an optional EH-62A AC adapter kit. While the monitor is off, the power-on lamp will blink. The camera will turn off automatically if no operations are performed for another three minutes.

70