Nikon COOLPIXS10 manual Electronically Controlled Cameras

Technical Notes

Display	Problem					Solution
PICTMOTION CANNOT BE	Pictmotion	fi les		have		Delete affected Pictmotion movie.		46
PLAYED BACK	been deleted or moved.
THIS IMAGE CANNOT BE	Picture is protected.					Remove protection.		62
DELETED
NEW CITY IS IN THE	Destination		in	same		No need to change time zones if desti-		66
CURRENT TIME ZONE	time zone as home.					nation is in same time zone as home.
						Turn camera off and then on again. If
LENS ERROR	Lens error.					error persists, contact retailer or Nikon		10
						representative.
	USB cable disconnected					If PictureProject displays error, click
						[OK] to exit. Resume operation after		47–49,
	during transfer or print-					turning camera off and reconnecting		51
COMMUNICATIONS ERROR	ing.					cable.
	[USB] option incorrect.					Choose correct [USB] option.		49
	PictureProject		did		not	See the PictureProject reference man-			—
	start.					ual (on CD) for more information.
NO IMAGES ARE MARKED	No pictures selected for					Select pictures	for transfer and try	62
FOR TRANSFER	transfer.					again.
TRANSFER ERROR	Transfer error.					• Check battery level.		10
						• Check that USB cable is connected.		47–48
	Error has	occurred			in	Turn camera off, remove and reinsert
SYSTEM ERROR	camera’s internal				cir-	batteries, and turn camera on. If error		7
	cuitry.					persists, contact retailer or Nikon rep-
						resentative.
PRINTER ERROR						Check printer.	To resume, highlight
	Printer error.					[Resume] (if available) and press			—
CHECK PRINTER STATUS
						button.

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the cam- era may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the batteries, and then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected.

78