Nikon COOLPIXS4000PLUM, COOLPIXS4000MDKIT, COOLPIXS4000CS, s4000, coolpix Error Messages, 163

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

Display	Problem		Solution	A
O(blinks)	Clock not set.	Set date and time.		141
B	Battery running low.	Prepare to charge or		16, 18
		replace battery.
N	Battery exhausted.	Charge or change battery.		16, 18
Battery exhausted.
		Turn off camera, and allow
		battery to cool down
		before resuming use. After
		five seconds, this message
		will disappear, the monitor
P	Battery temperature is	will turn off, and the
Battery temperature		power-on lamp will blink		21
	high.
high		rapidly. After the lamps
		blink for three minutes, the
		camera will turn off
		automatically. Pressing the
		power switch also turns off
		the camera.
		•	Refocus.	30, 31
		•	Focus on another	39	Technical
			camera as the intended
Q(● blinks red)	Camera cannot focus.		subject positioned at the
			same distance from the
			subject.		Notes
P	Camera cannot perform	Wait until message clears
Please wait for the		from display automatically			and
	other operations until			–
camera to finish		when recording is
	recording is complete.				Index
recording.		complete.
u	Write-protect switch is in	Slide write-protect switch
Memory card is write				25
	“lock” position.	to “write” position.
protected.
P		•	Use approved card.	161
This card cannot be
		•	Check that connectors	24
used.	Error accessing memory
			are clean.
P	card.	•
			Confirm that memory	24
This card cannot be
			card is correctly inserted.
read.

163