Nikon D3000 Approved Memory Cards

	Capture NX 2: A complete photo editing package.
Software	Note: Use the latest versions of Nikon software. Most Nikon software offers an auto
	update feature when the computer is connected to the Internet. See the websites
	listed on page xvi for the latest information on supported operating systems.
Body cap	Body Cap BF-1A: The body cap keeps the mirror, viewfinder screen, and low-pass filter
	free of dust when a lens is not in place.
	Wireless Remote Control ML-L3(0 55): Use as a remote shutter release for self-portraits
	or to prevent blur caused by camera shake. The ML-L3 uses a 3 V CR2025 battery.
Remote
controls
	Pressing the battery-chamber latch to the right (q), insert a fingernail into the gap
	and open the battery chamber (w). Ensure that the battery is inserted in the
	correct orientation (r).

Approved Memory Cards

The following SD memory cards have been tested and approved for use in the D3000. All cards of the designated make and capacity can be used, regardless of speed.

SanDisk 512 MB, 1 GB, 2 GB *, 4 GB †, 8 GB †, 16 GB †

Toshiba 512 MB, 1 GB, 2 GB *, 4 GB †, 8 GB †, 16 GB †, 32 GB †

Panasonic 512 MB, 1 GB, 2 GB *, 4 GB †, 6 GB †, 8 GB †, 12 GB †, 16 GB †, 32 GB †

512 MB, 1 GB, 2 GB *, 4 GB †, 8 GB †

Lexar Media Platinum II: 512 MB, 1 GB, 2 GB *, 4 GB †, 8 GB † Professional: 1 GB, 2 GB *, 4 GB †, 8 GB †

* If card will be used with card reader or other device, check that the device supports 2GB cards.

† SDHC compliant. If card will be used with card reader or other device, check that the device supports SDHC.

Other cards have not been tested. For more details on the above cards, please contact the manufacturer.

n

167