Nikon D3000 manual 202

Indicator
Monitor	Viewfinder		Solution	0
This card is not formatted.	T	Format card or turn camera off and insert new		21
Format card?	(blinks)	memory card.
		• Reduce quality or size.		50
Card is full	j	•	Delete photographs.	33,
	(blinks)			101
		• Insert new memory card.		20
—	●	Camera can not focus using autofocus. Change		28,
	(blinks)	composition or focus manually.		42, 48
		• Use a lower ISO sensitivity		62
		• Use commercial ND filter		—
Subject is too bright.	q	•	In mode:
			S Increase shutter speed	69
			A Choose a smaller aperture (larger f-number)	70
		• Use a higher ISO sensitivity		62
		•	Use flash	58
Subject is too dark.	r	•	In mode:
			S Lower shutter speed	69
			A Choose a larger aperture (smaller f-number)	70
	A
No Bulb in S mode.	(blinks)	Change shutter speed or select manual exposure		69, 71
	&	mode.
	(blinks)
		Flash has fired at full power. Check photo in
—		monitor; if underexposed, adjust settings and try		—
	N	again.
Flash is in TTL mode. Choose	(blinks)	Change flash mode setting on optional flash unit		157
another setting or use a CPU		or use CPU lens.
lens.
		•	Use the flash.	58
		• Change distance to subject, aperture, flash		61,
			range, or ISO sensitivity.	62, 70
—		• Optional SB-400 flash unit attached: flash is in		—
			bounce position or focus distance is very short.
	N/s￿
			Continue shooting; if necessary, increase focus
	(blinks)
			distance to prevent shadows from appearing in
			photograph.
		Error occurred updating firmware for optional
Flash error		flash unit. Contact Nikon-authorized service		—
		representative.

n

184