Nikon D3000 “Point-and-Shoot”Photography (iand jModes), Step 1: Turn the Camera On, 2 Check the battery level, sBasic Photography and Playback, 1 Turn the camera on

sBasic Photography and Playback

“Point-and-Shoot” Photography (iand jModes)

This section describes how to take photographs in i(auto) mode, an
automatic “point-and-shoot” mode in which the majority of settings
	s
are controlled by the camera in response to shooting conditions, and
in which the flash will fire automatically if the subject is poorly lit. To
take photographs with the flash off while leaving the camera in
control of other settings, rotate the mode dial to j to select auto (flash off) mode.

Step 1: Turn the Camera On

1 Turn the camera on. Power switch

Remove the lens cap and turn the camera on. The information display will appear in the monitor.

2 Check the battery level.

Check the battery level in the information display or the viewfinder (if the monitor is off, press the R button to view the information display; if the monitor does not turn on, the battery is exhausted and must be recharged).

Information display	Viewfinder	Description
L	—	Battery fully charged.
K	—	Battery partially discharged.
H	d	Low battery. Ready fully-charged spare battery or
		prepare to charge battery.
H	d	Battery exhausted; shutter release disabled. Charge or
(blinks)	(blinks)	exchange battery.

25