Using the Built-in Flash

The camera supports a variety of flash modes for photographing poorly lit or backlit subjects.

❚❚Using the Built-in Flash: i, k, p, n, and oModes

1Choose a flash mode (0 68).

2Take pictures.

The flash will pop up as required when the shutter-release button is pressed halfway, and fire when a photograph is taken. If the flash does not pop up automatically, DO NOT attempt to raise it by hand. Failure to observe this precaution could damage the flash.

❚❚ Using the Built-in Flash: P, S, A, and M Modes

1

Raise the flash.

 

 

Press the M button to raise the flash.

z

2

 

Choose a flash mode (0 68).

 

3

Take pictures.

Mbutton

 

The flash will fire whenever a picture is taken.

 

 

ALowering the Built-in Flash

To save power when the flash is not in use, press it gently downward until the latch clicks into place.

67