Flash Compensation

Flash compensation is used to alter flash output from the level suggested by the camera, changing the brightness of the main subject relative to the background. Choose from values between –3 EV (darker) and +1 EV (brighter) in increments of 1/3 EV; in general, positive values make the subject brighter while negative values make it darker.

1Place the cursor in the information display.

If shooting information is not displayed in the monitor, press the P button. Press the P button again to place the cursor in the information display.

Information display

Pbutton

2Display flash compensation options.

Highlight flash compensation in the information display and press J.

t

3Choose a value.

Highlight a value and press J. To return to shooting mode, press the shutter-release button halfway.

Normal flash output can be restored by setting flash compensation to ±0. Flash compensation is not reset when the camera is turned off.

83