167
r
DDirect Measurement Mode
If no operations are performed while the displays are flashing, direct
measurement mode will end in the time selected for Custom Setting c2
(Standby timer, 0316).
AProtected Presets
If the current preset is protected (0171), white balance can not be fine-
tuned, the comment can not be edited, and 3 will flash in the top
control panel and viewfinder (and L in the rear control panel) if you
attempt to measure a new value.
ASelecting a Preset
Selecting Preset manual for the White balance
option in the shooting menu displays the dialog
shown at right; highlight a preset and press J.
If
no value currently exists for the selected preset,
white balance will be set to 5,200 K, the same as
Direct sunlight.