203
l
At values other than ±0.0, a Y icon will be displayed in the top
control panel and E will be displayed in the viewfinder after you
release the M button.
The current value for flash compensation can
be confirmed by pressing the M button.
Normal flash output can be restored by setting flash
compensation to ±0.0.
Flash compensation is not reset when the
camera is turned off.
AOptional Flash Units
The SB-910, SB-900, SB-800, SB-700, and SB-600 also allow flash
compensation to be set using the controls on the flash unit; the value
selected with the flash unit is added to the value selected with the
camera.
ASee Also
For information on choosing the size of the increments available for
flash compensation, see Custom Setting b3 (Exp./flash comp. step
value, 0313).
For information on choosing whether flash
compensation is applied in addition to exposure compensation when
the flash is used, see Custom Setting e4 (Exposure comp. for flash,
0325).
For information on automatically varying flash level over a
series of shots, see page 139.