Troubleshooting
Problem | Suggestion |
|
|
The answering system | • Make sure your remote access code is correct (see page 29). |
does not respond to | • Make sure you are calling from a |
remote commands. | hear tones. If you hear clicks, then it is not a |
| answering system. |
| • The answering system may not detect the remote access code when your announcement is |
| playing. Wait until the announcement is over before entering the code. |
| • There may be interference on the telephone line you are using. Press the dial pad keys firmly |
| when dialing. |
|
|
My cordless handset | • Make sure the power cord is securely plugged into the telephone base. Plug the unit into a |
beeps five times and | different working electrical outlet not controlled by a wall switch. |
i s n ot p er fo r m i n g | • Move the cordless handset closer to the telephone base. It may be out of range. |
normally. | • Reset the telephone base by unplugging the unit’s electrical power. Wait for 15 seconds and |
| |
| plug it back in again. Allow up to one minute for the cordless handset and the telephone base |
| to synchronize. |
| • Other electrictronic products can cause interference to your cordless telephone. Try installing |
| your telephone as far away from these electronic devices as possible: wireless routers, radios, |
| radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal |
| computers, kitchen appliances and other cordless telephones. |
|
|
www.vtechphones.com
47
Appendix
