AAUTO

If the mode dial is rotated to P, S, A, or M after AUTO is selected for ISO sensitivity in another mode, the ISO sensitivity last selected in P, S, A, or M mode will be restored.

AHi 0.3–Hi 2

The settings Hi 0.3 through Hi 2 correspond to ISO sensitivities 0.3–2 EV over ISO 6400 (ISO 8000–25600 equivalent). Pictures taken at these settings are more likely to be subject to noise (randomly-spaced bright pixels, fog, or lines).

ALo 0.3–Lo 1

The settings Lo 0.3 through Lo 1 correspond to ISO sensitivities 0.3–1 EV below ISO 100 (ISO 80–50 equivalent). Use for larger apertures when lighting is bright. Contrast is slightly higher than normal; in most cases, ISO sensitivities of ISO 100 or above are recommended.

AThe Shooting Menu

ISO sensitivity can also be adjusted using the ISO sensitivity settings option in the shooting menu (0 214).

ASee Also

For information on choosing the ISO sensitivity step size, see Custom Setting b1 (ISO sensitivity step value; 0 224). For information on displaying ISO sensitivity in the control panel or adjusting ISO sensitivity without using the W(S) button, see Custom Setting d3 (ISO display and adjustment; 0 229). For information on using the High ISO NR option in the shooting menu to reduce noise at high ISO sensitivities, see page 218.

S

106