Nikon D700 manual 327

Option	Description
	At the default setting of Sub-command dial, aperture can
	only be adjusted with the sub-command dial (or with the
	main command dial if On is selected for Change main/sub).
	If Aperture ring is selected, aperture can only be adjusted
Aperture	with the lens aperture ring and the camera aperture display
setting	will show aperture in increments of 1 EV (aperture for type G
	lenses is still set using the sub-command dial). Live view is
	not available when Aperture ring is selected and a CPU lens
	with an aperture ring is attached. Note that regardless of the
	setting chosen, the aperture ring must be used to adjust
	aperture when a non-CPU lens is attached.
	At the default setting of Off, the multi selector is used to
	choose the picture displayed during full-frame playback,
	highlight thumbnails, and navigate menus. If On is selected,
	the main command dial can be used to choose the picture
	displayed during full-frame playback, move the cursor left or
Menus	right during thumbnail playback, and move the menu
	highlight bar up or down. The sub-command dial is used to
and
	display additional photo information in full-frame playback
playback
	and to move the cursor up or down during thumbnail
	playback. While menus are displayed, rotating the sub-
	command dial right displays the sub-menu for the selected
	option, while rotating it left displays the previous menu. To
	make a selection, press 2, the center of the multi selector, or
	J.

U

327