II CompatibleNon-CPULenses

When using the following non-CPU lenses and accessories, rotate the camera mode

dial to Aand Mand set aperture using the lens aperture ring. In other modes, the

shutter-release isdisabled. Non-CPU lens data (_ 159)can beused to enable many

of the features available with CPU lenses, including color matrix metering; ifno data

are provided, center-weighted metering will be used in place of color matrix

metering, while if the maximum aperture isnot provided, the camera aperture

display will show the number of stops from maximum aperture and the actual

aperture value must be read off the lens aperture ring. For alist of non-CPU lenses

and accessories that can not beused with this camera, seepage 271.

13; PN-I I)
I Range of rotation for AI80-200mm f/2.8 ED
tripod mount islimited by camera body. Filters
can not be exchanged while AI 200_00mm f/4
ED is mounted on camera.
2 With maximum aperture of f/5.6 or faster.
3 If maximum aperture is specified using Non-
CPU lens data (_ 159), aperture value will be
displayed in viewfinder and control panel.
4 Can be usedonly if lens focal length and
maximum aperture are specified using Non-
CPU lens data (_ 159). Use spot orcenter-
weighted metering if desired results are not
achieved.
5 For improved precision, specify lens focal length
and maximum aperture using Non-CPU lens
data (_ 159).
6 Can be usedin mode Mat shutter speeds slower
than flash sync speed by one step or more.
7 Electronic rangefinder can not be used with
shifting or tilting.
8 Exposure determined by presetting lens
aperture. In mode A,preset aperture using lens
aperture ring before performing AE lock and
shifting lens. In mode M,preset aperture using
lens aperture ring and determine exposure
before shifting lens.
9 Exposure compensation required when used
with A128-85mm f/3.5-4.5, A135-105mm f/3.5-
4.5, A135-135mm f/3.5-4.5, or AF-S 80-200mm
f/2.8D. See teleconverter manual for details.
10 With maximum effective aperture of f/5.6 or
faster.
11 Requires PK-12 or PK-13 auto extension ring.
PB-6D may be required depending on camera
orientation.
12 Use preset aperture. In mode A, set aperture
using focusing attachment before determining
exposure and taking photograph.
• PF-4 Reprocopy Outfit requires PA-4 Camera
Holder.
27O