293
U
b4: Easy Exposure Compensation

This option controls whether the E button is needed to set

exposure compensation (pg. 128).

If On (Auto reset) or On is

selected, the 0 at the center of the exposure display will blink even

when exposure compensation is set to ±0.

AChange Main/Sub
The dial used to set exposure compensation when On (Auto reset) or On
is selected for Custom Setting b4 (Easy exposure compensation)
depends on the option selected for Custom Setting f9 (Customize
command dials)> Change main/sub (pg.326).
Option Description
KOn
(Auto reset)
Exposure compensation is set by rotating one of the
command dials (see note below). The setting
selected using the command dial is reset when the
camera or exposure meters turn off (exposure
compensation settings selected using the E button
are not reset).
On
As above, except that the exposure compensation
value selected using the command dial is not reset
when the camera or exposure meters turn off.
Off
(default)
Exposure compensation is set by pressing the E
button and rotating the main command dial.
Customize command dials> Change main/sub
Off (default) On
Exposure
mode
eSub-command dial Sub-command dial
fSub-command dial Main command dial
gMain command dial Sub-command dial
hN/A