383
n
When an SC-series 17, 28, or 29 sync cable is used for off-camera flash
photography, correct exposure may not be achieved in i-TTL mode.
We
recommend that you choose spot metering to select standard i-TTL flash
control.
Take a test shot and view the results in the monitor.
In i-TTL, use the flash panel or bounce adapter provided with the flash
unit.
Do not use other panels such as diffusion panels, as this may
produce incorrect exposure.
DUse Only Nikon Flash Accessories
Use only Nikon Speedlights.
Negative voltages or voltages over 250V
applied to the accessory shoe could not only prevent normal operation,
but damage the sync circuitry of the camera or flash.
Before using a
Nikon Speedlight not listed in this section, contact a Nikon-authorized
service representative for more information.