6
X

First Steps

Always turn the camera off before inserting or removing batteries or memory cards.
1Attach the strap.
Attach the strap securely to the two eyelets on the camera body as shown
below.
2Charge the battery.
If a plug adapter is supplied, raise the wall plug and connect the plug adapter
as shown below at left, making sure the plug is fully inserted. Insert the battery
and plug the charger in. An exhausted battery will fully charge in about an hour
and thirty minutes.
3Insert the battery.
Insert the battery in the orientation shown (e), using the battery to keep the
orange battery latch pressed to one side. The latch locks the battery in place
when the battery is fully inserted (r).
Charging
complete
Battery
charging