FOCUSING-continued

Infrared Photography

The plane of sharpest focus for infrared light is slightly more distant than its counterpart for visible light as seen through the camera's viewfinder. Thus, for sharpest fo- cus in infrared photography, adjustments must be made. To compensate for this shift in focus, first focus the image sharply through the viewfinder. Then, turn the focusing ring counterclockwise until the point fo- cused is aligned with the red dot (or line) provided on the lens barrel. For example, in the picture below, the lens has been focused for infinity (°°) infrared shooting. Note that when lenses having a focal length of 50mm or less are used stopped down to f/8 or below, no ad- justment is necessary due to the large depth of field available.

Note: Some new optics using Nikon's Extra-low Dispersion (ED) glass, as well as reflex (catadioptric) lenses, do not require refocusing for infrared photography. Refer to individual lens instruction manuals for details.

Film-Plane Indicator

Under various precision shooting situations, such as close-up photography, it is often necessary to measure the film-to-subject distance to ensure the sharpest focus. The camera's film plane is indicated by the spe- cial mark (-0-) on the upper right top of the camera body. Note that this indicator is 46.5mm from the front surface of the camera's lens mounting flange.

mounting flange front surface)

22

Page 22
Image 22
Nikon EL2 instruction manual Focusing, Infrared Photography