Nikon 1683 Rewind the film, Remove the film cartridge, Put the film advance lever back into place

22 Rewind the film.

•Lift the film rewind crank and turn it in the direction of the arrow. At the end of film rewind, you will feel a slight resistance . Continue winding one or two more turns until the crank feels lighter; this will indicate that the film leader is now fully rewound into the cartridge.

23 Remove the film

• cartridge.

Push the camera back lock lever in the direction of the arrow as you lift the film rewind crank to open the camera back. Take out the film cartridge. Avoid unload- ing film in direct sunlight.

24 Put the film advance

• lever back into place.

Close the camera back and push the film advance lever into place. When you 're not using the camera, you should set the film advance lever to this position which locks the shutter release button and keeps the exposure indicator lamps in- side the viewfinder switched off even if the shutter release button is accidentally pressed.

Note: Even if the exposure indicator lamp is lit, it will automatically be switched off in approx. 30 sec. , and the exposure measuring circuit will simultaneously be cut off.

15